Leica X Instructions d'exploitation Page 132

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 190
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 131
EN
130
Picture mode
PICTURE MODE
DISTANCE SETTING
On the Leica X, the distance can be set either automatically or
manually. Both modes cover a distance range of 20cm to infinity.
AUTOMATIC DISTANCE SETTING / AUTOFOCUS
1.
Turn the distance setting ring - overcoming the slight resistance
– to the
AF
position
2.
Press the shutter button to the pressure point to have the
sharpness and thus the distance automatically determined, set
and stored
A successfully stored AF setting is indicated as follows:
The color of the rectangle changes to green
Up to 9 green rectangles appear with the 11-field metering
An acoustic signal is generated (if selected)
Notes:
The setting is stored along with the exposure setting.
In certain situations the AF system is unable to set the distance
correctly, e.g. when:
the distance to the subject you are aiming at is outside the
available range, and/or
the subject is not sufficiently illuminated (see next section).
Such situations and subjects are indicated by:
The color of the rectangle changing to red
The 11-field metering display changes to a single red rectangle
Important:
The shutter button is not locked regardless of whether or not the
distance setting is correct for the relevant subject.
AF AUXILIARY LIGHT
The built-in AF auxiliary light extends the operating range of the AF
system to take account of poor lighting conditions. If the function is
active, this light is lit under appropriate conditions as soon as the
shutter button is pressed.
Select
AF Assist Lamp
in the menu, and the desired setting in the
submenu
Note:
The AF auxiliary light illuminates a range of approximately 4m.
Therefore, in poor lighting conditions AF mode is not available at
distances beyond this limit.
Vue de la page 131
1 2 ... 127 128 129 130 131 132 133 134 135 136 137 ... 189 190

Commentaires sur ces manuels

Pas de commentaire