Leica VT1200S Manuel d'utilisateur télécharger pdf (Page 12)

Operating Manual V1.1 – 05/2007

3. Instrument Characteristics

LED for feed rate

LED on, for enabled

amplitude adjustment

Sets the current specimen

position between 0 (lower)

and 20,000μm (upper) or –

after zero, totals the

section thicknesses

Toggles between SPEED

(blade feed rate) and

AMPL (amplitude)

Pressing this button toggles

between μm and ∑μm

(actively illuminated)

Moves the blade

towards the specimen

Moves the blade away

from the specimen

Quickly moves the speci-

men downwards (press

once to adjust to the lowest

position)

Immediately starts or stops

the sectioning process

Setting dial 1, for blade

feed rate and amplitude

Setting dial 2, for

section thickness and

moving the specimen

vertically

Selects the step size

in 1μm,10μm or

100μm

increments

Fig. 10

Resets the section

thickness addition

display ∑μm to zero

Press this button

(for approx. 3 sec.) to save a

frequently used feed value

(pressing it more than once

feeds by the saved section

thickness multiple times)

Section thickness

LED display for

section thickness and

section thickness addition

LED display for

blade feed rate and

amplitude

ON/OFF lamp

3.3 VT1200 Control Panel

The Leica VT1200 is a semiautomatic microtome with a vibrating blade. Before each cut,

a manual feed to the desired section thickness must be carried out using the setting dial for

section thickness. The VT1200 does not include an automatic specimen retraction; however,

retraction can be performed manually.

Quickly moves the speci-

men upwards (press the

button until the desired

position is reached)

Caution: Press the button until the desired

position is reached. When the end position is

reached, the LED lights up.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 57 58

Commentaires sur ces manuels

Pas de commentaire

Leica VT1200S Manuel d'utilisateur Page 12

Commentaires sur ces manuels