Leica VT1200S Manuel d'utilisateur télécharger pdf (Page 17)

Leica VT1200 and VT1200 S – Microtome

4. Installation

4.3 Before Commissioning the Instrument

Fig. 13

Once the instrument is in its final location, unscrew

the transport handles (1) from the instrument us-

ing the size 6 Allen key provided and store them,

along with the screws, in a safe place.

1. Set the power switch (7) on the right side of

the instrument to OFF (❍).

2. Make sure that the power cable connection

in the power socket (2) on the right side of the

instrument is correct.

3. Connect the control panel to the socket (3).

4. Install the ice bath (4).

5. Install the buffer tray (5).

6. Install any optional accessories, such as the

magnifier, microscope, foot switch, etc. ac-

cording to p. 49.

7. Use the power switch (7) to switch on the in-

strument.

7 (AN)

Fig. 14

To make it easier to insert the speci-

men, adjust the specimen receptacle

to its lowest position, and adjust the

blade holder to its rearmost position

during the first reference run.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 57 58

Pas de commentaire

Leica VT1200S Manuel d'utilisateur Page 17