Leica VT1200S Manuel d'utilisateur télécharger pdf (Page 34)

Operating Manual V1.1 – 05/2007

5. Working with the Instrument

5.4.4 Installing and Removing the Blade Holder

Fig. 19

• Before the blade holder can be replaced, it

must be brought into a 45° inclined position.

To do so, insert the size 3 Allen key sideways

into the blade holder through the hole (8) and

rotate it 45° clockwise.

Turning the screw (9) counterclockwise

releases the blade holder, allowing it to be

replaced.

• The installation is carried out in reverse order.

Cleaning the blade holder

To clean the blade holder after removal, spray it

with alcohol. It can then be wiped down with a

piece of cellulose and placed on a cellulose tow-

el to dry completely.

For quality and service reasons, the

blade holder (7) is available as a com-

plete unit only.

Always remove the blade BEFORE in-

stalling or removing the blade holder!

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 57 58

Pas de commentaire

Leica VT1200S Manuel d'utilisateur Page 34